Protection Measures: Wear personal protection equipment (respiratory mask, gloves, goggles). For more information, see the safety data sheet.
Shake: Before activating, shake the can thoroughly for 2 minutes from when the mixing balls are heard.
Activate: Remove the red button from the cap, turn the can by 180°, fit the button onto the pin, turn the can upside down, and press the red button with the palm of your hand until it clicks into place.
Shake Again: After activating, shake the can thoroughly for another 2 minutes from when the mixing balls are heard.
Test Spray: Test spray and check compatibility with the surface and the color.
Spraying Distance: Maintain a spraying distance of 6 - 8 inches (15 - 20 cm).
Spray Passes: Apply 1-2 spray coats to achieve a dry film thickness of 1.6 mil (40 µm).
Flash-Off Time: Allow approximately 5 minutes of flash-off time between each spray coat.
Processing Conditions: Optimum application at 64°F - 77°F (18°C - 25°C) and a relative humidity of 40 - 60%.
Coverage: Approximately 5.4 - 8.1 sq ft (0.5 - 0.75 m²) per aerosol at an approximate dry film thickness of 1.2 - 2.0 mil (30 - 50 µm).
Drying: Dust dry in 20 minutes, dry to touch in 250 minutes, and ready for assembling after 8 - 24 hours (overnight).
Finish: After painting, turn the can upside down and spray the valve until empty.